2007 Mercedes-Benz E350
CRM Mitchell1 2020-10-04T22:02:08+00:00
Mileage
114,466
Service Date
10/2/2020
Services Performed
- INFLATE TIRES TO FACTORY SPECIFIED PSI
- REMOVED VALVE BODY AND CONDUCTOR PLATE, SENT CONDUCTOR PLATE OUT TO BE REPAIRED, ONCE RECEIVED REPAIRED CONDUCTOR PLATE, RE-INSTALLED CONDUCTOR PLATE AND VALVE BODY, REPLACED TRANSMISSION FILTER, FILLED TRANSMISSION. TEST DROVE AND CONFIRMED REPAIR.
- TEST DRIVE, PERFORM VISUAL CHECK OF UNDERHOOD COMPONETS, RETRIEVE COMPUTER FAULT CODES, CK FUEL SYSTEM PRESSURE AND VOLUMN IF APPLICABLE, SCOPE IGNITION , CK VACUUM AND VAPOR HOSES AND CONNECTION, PERFORM INTAKE SMOKE TESTS, CONSULT FACTORY REPAIR PUBLICATIONS AND WIRING IF NECESSARY E1805 FAULT PRESENT IN CONTROL MODULE (TRANSMISSION 2768 2768 COMPONENT Y3/8N2 (INT SPEED SENSOR (VGS) IS DEFECTIVE 2767 SIGNAL FROM COMPONENT Y3/8N2 (INT SPEED SENSOR (VGS) IS NOT AVAILABLE 9204 CONTROL UNIT ASSYST IS NOT RECEIVING ANY MESS FROM THE ENGINE COMPARTMENT CAN BUS 9204 THE CODING OF THE CONTROL UNIT ASSYST PLUS IS NOT COMPLETE 9099 FAULT IN CAN COMM W/CONTROL UNIT C9W ERASE AND IGNORE IF THIS MODULE IS NOT FITTED TO THIS VARIANT 9401 CONTROL UNIT N93 (CENTRAL GATEWAY CONTROL UNIT) IS NOT TRANSMITTING DATA ON THE CAN BUS 5024 THE CAN COMM OF ENG. CONTROL MODULE IS FAULTY 5025 " " " " " " " " " 5026 " " " " " " " " " 5020 FAULT OF CAN COMM WITH CONTROL UNIT ESP PROG. RT/FR 930C KNOWLEDGE BASE CONFIGURATION IS INCOMPLETE. D146 NO OR INCORRECT CAN MESSAGE FROM CONTROL UNIT N73 (ELECTRIC IGNITION SWITCH CONTROL UNIT) /NO OR INCORRECT MESSAGE FROM CONTROL UNIT N93 (CENTRAL GATEWAY CONTROL UNIT) D010 SUPPLY VOLTAGE OF THE CONTROL UNIT IS TOO LOW (UNDERVOLTAGE)
- 157350
ALEX S. gave our service a 5 star review on 10/3/2020
